Impediment RS-1600-X24 User Manual Download Page 138

Page: 138 / 256

RS-1600-X24 User Guide

120

Select the array you want and press

Enter

The array menu displays.

Select

Drive Status

and press

Enter

The drive status screen displays showing the drives that are members of the array and that are assigned

as dedicated spares.

Use the

↑

↓

key to scroll through the drives. These are the drives that are currently members of the

array.

Press

Esc

to return to the Array Menu.

C.2.2 Stopping the Array Initialization Process

If you find that you need to change the disks or some other array configuration, you can stop the array
initialization process.

Caution

If you stop the initialization process, the array goes offline and its data is not available to users.

You must delete the array before you can use the drives in another array.

To stop the array initialization process:

From the System Menu, select

Array Menu

and press

Enter

The Select Array screen displays with a list of existing arrays.

Select the array you want and press

Enter

The array menu displays.

Select

Abort Initialization

and press

Enter

The system confirms that you want to stop the initialization process.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands