Impediment RS-1600-X24 User Manual Download Page 235

Page: 235 / 256

LAN Configuration

217

Select

SNMP Settings

and press

Enter

The SNMP Settings screen displays.

Select the option you want and press

Enter

The screen displays related to the option you selected.

Enter or select the option you want and press

Enter

The system confirms that you want to make the change.

Select

Yes

and press

Enter

The system makes the change.

H.2.5 Configuring the Contact Settings

You can set four contact settings:

•

System Name

: Name of the X24 Subsystem as seen by other systems on the LAN. You can enter

up to 80 characters. The default is Uninitialized Name.

•

System Contact

: Name of a contact person responsible for the X24 Subsystem. You can enter up

to 80 characters.

•

System Location

: Location of the X24 Subsystem. You can enter up to 32 characters.

•

System Information

: Read-only screen with information about the system.

Changes to any of these settings on either SM module are automatically updated on the other SM
module.

To set the contact settings:

From the System Menu, select

Configuration

Menu

and press

Enter

The Configuration Menu displays.

Select

LAN Configuration

and press

Enter

The LAN Configuration screen displays.

Select

Contact Settings

and press

Enter

The Contact Settings screen displays.

Select the option you want and press

Enter

The screen displays related to the option you selected.

Enter or select the option you want and press

Enter

The system confirms that you want to make the change.

Select

Yes

and press

Enter

The system makes the change.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands