manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 67 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 67

System Configuration

49

2

Select the option you want:

•

Use Current IP Addresses

: Restores the configuration file to the X24 Subsystem that SAM is 

currently connected to and retains the currently assigned IP addresses. Use this to restore a backup 
configuration file to the current X24 Subsystem without changing the IP addresses of the X24 

Subsystem. This option ignores the IP addresses contained in the configuration file.

•

Use New IP Addresses

: Restores the configuration file to the X24 Subsystem SAM is currently 

connected to and changes the X24 Subsystem’s IP addresses to what you enter here. Use this 
option to clone the X24 Subsystem and change the IP addresses to what you enter. This option 
ignores the IP addresses contained in the configuration file. Enter the IP Address, Subnet Mask, and 

IP Gateway for both SMs on the same X24 Subsystem. After the file is restored, you must reconnect 
to the X24 Subsystem using one of the new IP addresses.

•

Use Restore File IP Addresses

: Restores the configuration file to the X24 Subsystem that SAM is 

currently connected to and changes the IP addresses to those contained in the configuration file. 
Use this to restore a configuration file to the current X24 Subsystem whenever the IP addresses in 
the configuration file are the IP addresses you want assigned to the X24 Subsystem. After the file is 

restored, you may need to reconnect to the X24 Subsystem using one of the IP addresses from the 
file.

3

Click 

Continue

.

A new page displays. The information on the new page depends on your selection in the previous page. 

4

If you chose the Use New IP Addresses option, enter the new IP addresses here and click 

Continue 

Restore Process

.

5

Click

 Browse

 to navigate to the X24 Subsystem configuration file on the host system or anywhere on 

your network. 
The

 Choose File

 window displays.

6

Navigate to the file and select it.

7

Click 

Open

.

8

Click 

Restore Configuration File

. 

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments