manualshive.com logo in svg

Impediment RS-1600-X24, User Manual

The Impediment RS-1600-X24 is a state-of-the-art device designed for ultimate performance. Discover its full potential by accessing the comprehensive User Manual, available for free download at manualshive.com. This manual guarantees a seamless experience, providing detailed instructions and troubleshooting tips to optimize your use of this cutting-edge product.

Share
Download
background image

RAID Management

25

3.4 Managing Partitions

The SAM software lets you manage partitions in a variety of ways. You can:

• View partition status information (see 

page 25

)

• Change a partition name (see 

page 25

)

• Change a partition LUN (see 

page 26

)

• Control partition access (see 

page 27

)

• Change a partition’s read-ahead cache size (see 

page 30

)

• Delete a partition (see 

page 31

)

3.4.1 Viewing Partition Status Information

Partition status information is available from many pages in SAM. The top panel on all Disk Array Config 

and LUN Management pages displays an icon for each array with information about the array below it. 

In this top panel, critical arrays display a blinking, red exclamation mark through the array. If a utility is 
running on the array, the percent complete displays. If any array is critical for any reason other than 

initializing or reconstructing, you should review the status information and take the appropriate action, 
such as replacing a disk drive. For more information about the array icons, refer to the Understanding the 
Array Icons section of the X24 Subsystem Getting Started Guide.

More detailed partition information is available from two pages (for information about the fields on each 
page, click 

Page Help

):

•

Monitor X24 Subsystem > Status > Storage Array Status

—includes partition information for the 

selected array.

•

Manage X24 Subsystem > LUN Management

—includes more detailed partition information and a 

graphical depiction of the partitions for the selected array.

3.4.2 Changing a Partition Name

You can change the name of a partition. This does not affect the target ID or LUN values of the partition. 
You cannot change a partition name when a utility is running. 

To change a partition name:

1

From SAM, select 

Manage X24 Subsystem > LUN Management > Change Partition Name

.

The 

Change Partition Name 

page displays with a list of all existing arrays. 

2

In the 

Select an Array to View LUN Information

 panel, select the array whose partition you want to 

rename.

3

In the 

Partition Menu 

panel, select the current partition name.

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments

Related manuals for RS-1600-X24

Harsco Taylor-Wharton XL-65 Instructions Manual preview
Taylor-Wharton XL-65
Brand: Harsco Pages: 26
iXsystems TrueNAS R Series Basic Setup Manual preview
TrueNAS R Series
Brand: iXsystems Pages: 24
Transcend StoreJet 35T User Manual preview
StoreJet 35T
Brand: Transcend Pages: 24
Nexsan Nexsan Unity Hardware Maintenance Manual preview
Nexsan Unity
Brand: Nexsan Pages: 76
GARANT 92 0051 1500 User Manual preview
92 0051 1500
Brand: GARANT Pages: 40
Weather Guard Rapid Mount 9909-3-02 Installation Manual preview
Rapid Mount 9909-3-02
Brand: Weather Guard Pages: 9
SanDisk CruzerSync Getting Started Manual preview
CruzerSync
Brand: SanDisk Pages: 7
Seagate EXOS ENTERPRISE ST10000NM001G Product Manual preview
EXOS ENTERPRISE ST10000NM001G
Brand: Seagate Pages: 56
Arrow Storage Products BGR1210FG Owner'S Manual & Assembly Instructions preview
BGR1210FG
Brand: Arrow Storage Products Pages: 73
IBM Deskstar 14GXP Quick Installation Manual preview
Deskstar 14GXP
Brand: IBM Pages: 2
DEC DS-HSZ22-AA User Manual preview
DS-HSZ22-AA
Brand: DEC Pages: 94
Mercia Garden Products 03BUT0606-V1 General Instructions Manual preview
03BUT0606-V1
Brand: Mercia Garden Products Pages: 9
Haworth Beside Storage Pantry Quick Start Manual preview
Beside Storage Pantry
Brand: Haworth Pages: 6
Palram CANOPIA RUBICON How To Assemble preview
CANOPIA RUBICON
Brand: Palram Pages: 71
Seville Classics UltraHD 20206 Assembly Instructions Manual preview
UltraHD 20206
Brand: Seville Classics Pages: 7
Hitachi F1500 Hardware Manual preview
F1500
Brand: Hitachi Pages: 208
Hitachi AMS 2500 Getting Started Manual preview
AMS 2500
Brand: Hitachi Pages: 36
HP StoreAll 8000 Quickspecs preview
StoreAll 8000
Brand: HP Pages: 18

Brands by name

Popular brands

Load more brands