Impediment RS-1600-X24 User Manual Download Page 156

Page: 156 / 256

RS-1600-X24 User Guide

138

Press

Esc

to return to the statistics menu.

C.3.2.3

Resetting Partition Statistics

You can reset the following partition statistics to zero:

• Read

• Write

• SecRd

• SecWt

• I/O Size

Note

Resetting statistics here also resets the statistics for this partition that are included in the aggregate
statistics. See

D.7, ”Displaying Overall Statistics”, on page 165

You may want to reset the statistics if you are monitoring performance or doing benchmark testing. You
may also want to reset statistics when you change how you are using the partition.

Note

You cannot reset the queue depth value. It always reflects the current I/O queue depth.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Impediment RS-1600-X24, User Manual, Page: 156 / 256

Search results

Summary of Contents for RS-1600-X24

Reviews: