Impediment RS-1600-X24 User Manual Download Page 59

Page: 59 / 256

System Configuration

5.1.3 Configuring the System Information

You can set four system information settings:

•

System Name

: Name of the X24 Subsystem as seen by other systems on the LAN. You can enter

up to 74 characters. The default is Uninitialized Name.

•

System Contact

: Name of a contact person responsible for the X24 Subsystem. You can enter up

to 74 characters.

•

System Location

: Location of the X24 Subsystem. You can enter up to 74 characters.

•

System Information

: Additional information about the X24 Subsystem. You can enter up to 74

characters.

To configure the system information:

In SAM, select

Manage X24 Subsystem > General Config

The System Information page displays.

Enter the system information.

Click

Change System Configuration

5.1.4 Setting Passwords

You can set passwords for the following:

• Monitor User Password: These users only have access to the functions on the Monitor X24

Subsystem menu. The default is monitor. Up to three monitor-only users can be logged in at a time.
You can use up to 31 characters. You can use only letters, numbers, and underscores.

•

Manage User Password:

These users have access to all SAM functions. The default is manage.

Only one manage user can be logged in at a time. You can use up to 31 characters. You can use
only letters, numbers, and underscores.

•

Telnet User Password:

Password for accessing the SM using the Ethernet port and Telnet. The

default is null (press

Enter

). You can use up to 15 characters. You can use only letters, numbers,

and underscores.

•

FTP User Login:

updates. The default is flash. You can use up to 15 characters. You can use only letters, numbers,
and underscores.

•

FTP User Password

: Password for FTP access to the SM. The default is flash. You can use up to

15 characters. You can use only letters, numbers, and underscores.

•

SNMP Read Community

: SNMP read password. The default is Public. You can use up to 15

characters. You can use only letters, numbers, and underscores.

•

SNMP Write Community

: SNMP write password. The default is Private. You can use up to 15

characters. You can use only letters, numbers, and underscores.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands