manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 126 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 126

RS-1600-X24 User Guide

108

Note

A RAID 10 array is created when there are more than two drives in a mirrored array.

See 

, ”Array Basics”, on page 89

, for more information.

If you selected RAID 50 as the array type, the Select RAID 50 Array Size screen displays (not shown) 
with all possible configurations for the array and drive combinations. Select the configuration you want, 

press 

Enter

, and skip to step 7.

If you selected any array type other than RAID 50, the Number of Drives screen displays. 

6

Enter the number of drives (excluding spares) you want in the array and press 

Enter

.

The Select Drives screen displays. The list includes all available drives, that is, drives that are not 

members of an array and are not assigned as a dedicated or pool spare, on either SM. The screen 
includes the following information for each drive: 

• Loop ID for each channel; ------ shows a single ported drive)

• Size

• Vendor

• Model or serial number or node and WWN (press 

T

 to toggle the display)

• Rev (firmware revision)

• Usage

• Drive usage 

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments