Impediment RS-1600-X24 User Manual Download Page 237

Page: 237 / 256

LAN Configuration

219

•

SNMP

: Controls the availability of SNMP, which permits remote monitoring of the X24 using your

LAN. The default is enabled.

•

Internet Debug

: Used for diagnosing problems during the technical support process. We

recommend that this remain disabled unless support personnel tell you to enable it. The default is

disabled.

Changes to any of these settings on either SM module are automatically updated on the other SM

module.

To change any of the security options:

From the System Menu, select

Configuration

Menu

and press

Enter

The Configuration Menu displays.

Select

LAN Configuration

and press

Enter

The LAN Configuration screen displays.

Select

Security Options

and press

Enter

The Security Options screen displays.

Select the option you want and press

Enter

The screen displays related to the option you selected. The current option has an * next to it.

Select

Enable

Disable

and press

Enter

The system makes the change.

H.2.8 Resetting the LAN Subsystem

If you are having difficulty communicating with the SM module using the Ethernet connection, you can
reset the LAN Subsystem in the SM module.

To reset the LAN Subsystem:

From the System Menu, select

Shutdown

Menu

and press

Enter

The Shutdown Menu displays.

Select

Reset LAN Subsystem

and press

Enter

The system confirms that you want to reset the LAN Subsystem.

Select

Yes

and press

Enter

The system resets the LAN Subsystem.

Summary of Contents for RS-1600-X24

































































































































































































































































Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands

Impediment RS-1600-X24, User Manual

Search results

Summary of Contents for RS-1600-X24

Reviews:

Related manuals for RS-1600-X24

Brands by name

Popular brands