manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 14 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 14

RS-1600-X24 User Guide

xii

• Provide a suitable power source with electrical overload protection to meet the requirements laid 

down in the technical specification.

• A faulty power supply/cooling module must be replaced with a fully operational module within 24 

hours.

Warning

Do not remove covers from the power supply unit. Danger of electric shock inside. Return the PSU 
to your supplier for repair.

Caution

Caution: If this equipment is used in a manner not specified by the manufacturer, the protection provided 
by the equipment may be impaired.

Battery Safety

The battery is user replaceable, please refer to the Battery Replacement Procedure.

Warning

There is a danger of explosion if the battery is incorrectly replaced.

• Dispose of used batteries in accordance with the manufacturer’s instructions and National 

regulations.

Laser Safety

Class 1 Laser Product

When the X24 Subsystem is supplied with optical modules they contain a laser that complies with Laser 
Class 1, US 21 CFR (J) and EN 60825-1.

If optical modules are to be provided and fitted by the end user, lasers must comply with the standards 
listed above.

PSU Safety Label:

Electric Shock Hazard Inside

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments