manualshive.com logo in svg

Impediment RS-1600-X24, User Manual, Page: 49 / 256

Share
Download
Impediment RS-1600-X24 User Manual Download Page 49

RAID Management

31

4

In the Partition Read Ahead Size panel, select the size you want.

The current size displays in the drop-down list with ** next to it.

5

Click 

Set Read Ahead Cache Size

.

3.4.6 Deleting a Partition

You can delete a partition when you no longer need it and you want to use the space for another purpose.

Caution

Deleting a partition deletes all data contained in the partition.

Note

You cannot delete a partition while any utility (Initialize, Verify, Expand, or Reconstruct) is running on the 
array. You must stop the utility, if allowed, or let it finish before you can delete the partition.

To delete a partition:

1

From SAM, select 

Manage X24 Subsystem > LUN Management > Partition Menu > Delete Partition

.

The

 Delete Partition

 page displays with a list of all existing arrays. 

2

In the 

Select an Array to View LUN Information

 panel, select the array whose partition you want to delete.

3

In the 

Partition Menu 

panel, select the partition name.

4

Click 

Delete Partition

.

Summary of Contents for RS-1600-X24

































































































































































































































































Reviews:

No comments