imagistics DL650, Operating Manual

Page: 324 / 344

15-4 Troubleshooting
Troubleshooting
Memory Overflow
In certain modes, the DL650 uses memory for convenience and to make operations flow
smoothly. Occasional memory overflow may occur if the installed memory is inadequate
for the copy conditions selected. Should memory overflow occur frequently, it is
recommended that you contact your service representative to extend the memory capacity
in your machine.
When memory overflow occurs, the following screen will be displayed to enable you to take
an appropriate measure for the current job situation.
Memory Overflow Management Screen
When memory overflow occurs while scanning the first job, the machine stops
immediately, and the screen provides
JOB STOP
and
SCAN STOP
as the only two
available options.
NOTE: If the job settings include Booklet mode, SCAN STOP will disappear.
• To delete all the scanned data and discontinue the job, touch
JOB STOP
.
• To give up further scanning but print out all the data already scanned into memory, touch
SCAN STOP .
When memory overflow occurs during the reserve operation,
CONTINUE
also appears on
the active screen. In this case, the machine will not stop until all the jobs on standby for
printing are completed.
• To delete the scanned data and discontinue the last reserve job, touch
JOB STOP
.
• To give up further scanning but print out the data already scanned for the last reserve
job, touch
SCAN STOP
.
NOTE: If the job settings include Booklet mode, SCAN STOP will disappear.
• To continue scanning the last reserve job, touch
CONTINUE
as the current printing job
gradually enables memory for new data.
DL650us15v1.fm 4 ページ ２００１年１１月１４日 水曜日 午後４時５分