imagistics DL650, Operating Manual

Page: 153 / 344

Output Modes 7-25
Output Modes
Manual Finishing (continued)
NOTE: Refer to the specifications on previous page for available paper size and capacity in each mode.
2 Press Staple Mode Selection button and/or Punch button to select the desired mode.
NOTE: Punching mode is compatible with 1 oblique staple, 2 parallel staples, or Stapling & Folding mode.
3 Press Start/Stop button.
Finished sheets will be delivered to the appropriate tray according to the selected mode.
NOTE: If you want to stop the Manual Finishing operation, press the Start/Stop button again. The Finisher will
cease operating. When using Stapling & Folding mode, the unfinished set will be left in the stacker unit
inside the Finisher.
CAUTION
When the Booklet tray capacity is exceeded, the finisher will cease operating. To avoid this, select the
appropriate print quantity from the specifications on p. 7-13.
CAUTION:
When the selected print quantity exceeds the Finisher’s maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
DL650us071v1.fm 25 ページ ２００１年１１月１４日 水曜日 午後３時１２分