imagistics DL650, Operating Manual

Page: 186 / 344

Transparency Interleave (continued)
9-16 Applications
Applications
Application Selection Screen Transparency Interleave Screen
1 Load copy paper in tray 1, 2, 3, or 4 to match the size of transparencies.
2 Open the Multi-sheet bypass tray. Insert one transparency at a time into the Multi-sheet
bypass tray, and adjust the paper guides.
IMPORTANT: do not load transparencies into any other tray.
3 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
4 Touch
Transparency Interleave
to display the Transparency Interleave Screen.
5 Touch Blank sheet Interleaving or Copy sheet Interleaving , unless it is already
highlighted.
6 Touch
OK
.
7 Make additional Application selections, or touch
OK
to return to the Basic Screen.
8 Print quantity is already set to 1. Not available to enter any other number.
9 Place original FACE UP in the EDH or FACE DOWN on the platen glass.
When using Platen store mode, see p. 6-35 to p. 6-36.
When using EDH store mode, see p. 6-37.
Option: Press [Panel Check] to view the selection, and make a Proof copy, if desired. Touch EXIT to return to
the Basic Screen. See p. 6-43 to p. 6-45.
10 Press [
Start
].
After copying is completed, touch Transparency Interleave on the Application Selection
Screen or press [ Panel Reset ] to release the mode and reset the machine.
DL650us091v1.fm 16 ページ ２００１年１１月１４日 水曜日 午後３時１９分