imagistics DL650, Operating Manual

Page: 89 / 344

Basic Operations 6-9
Basic Operations
Copy Mode (continued)
1
s
2 Copy Mode Using Platen Glass
When copying in 1-2 mode from the platen glass, use the Platen store mode. Refer to p. 4-
2 for details on positioning originals.
Special Original Screen Output Mode Screen (with Finisher)
Basic Screen (with platen 1
s
2 mode selected)
1 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen,
then touch the desired original direction key to highlight it.
Touch
OK
to return to the Basic Screen.
2 Touch
OUTPUT APPLI.
to display the Output Mode Screen, then touch the desired
binding mode key to highlight it.
Touch
OK to return to the Basic Screen.
NOTE: Selecting UP BINDING will make copies upside down on the reverse side, while the RIGHT&LEFT
BINDING copies normally.
3 Open the EDH.
Place original FACE DOWN on the platen glass according to the original direction
specified in step 1, then close the EDH.
IMPORTANT: PLACE AND SCAN ORIGINALS IN REGULAR ORDER OF PAGINATION.
4 Touch 1
s
2 .
The STORE key is automatically highlighted on the screen.
DL650us061v1.fm 9 ページ ２００１年１１月１４日 水曜日 午後２時５７分