imagistics DL650, Operating Manual

Page: 295 / 344

Key Operator Mode 13-45
Key Operator Mode
Memory Switch Setting [13] (continued)
1 Press [
Help
] to display the Help Screen, then touch
Key Operator Mode
.
Enter the 4-digit Key Operator password, then touch
OK
to display the Key Operator
Mode Screen. (See note.)
To display menus [11] to [20] of the Key Operator Mode Screen, touch the
Lower
arrow key.
2 Touch
[13] Memory switch setting
to display the Memory Switch Setting Screen.
3 Use the procedure below to select the desired item and change the setting.
(1) To select the desired item, touch the arrow keys (
▲
) and (
▼
) at the right of the
Memory Switch Setting Screen.
(2) To scroll, touch the arrow keys at the lower left of the screen.
(3) Touch
Change Setting Contents
to change the setting of the highlighted item.
(4) Repeat above steps (1) to (3) to make several changes in succession.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 Touch RETURN to return to the Basic Screen and perform copying operations.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
The following functions can be provided by the Memory Switch settings.
[1] Panel reset timer
Set the reset interval starting from the completion of a copying job until the machine
returns to the initial condition.
[2] Panel Reset key function
Set the condition of the following modes when [
Panel Reset
] is pressed: Copy mode, Copy
density, Magnification, Tray selection.
[3] EDH-Original effect
Set the machine condition when original is set on EDH in non-EDH mode with EDH unit
closed.
[4] Program memory auto recall (30)
Program memory number 30 is automatically recalled when power is turned on or when
Panel Reset is restored.
This job recall function works only when Job number 30 is registered.
[5] Finisher mode by Full-auto
Set the Finisher mode to be recalled when [
Panel Reset
] is pressed.
DL650us133v1.fm 45 ページ ２００１年１１月１４日 水曜日 午後３時４５分