imagistics DL650, Operating Manual

Page: 267 / 344

Key Operator Mode 13-17
Key Operator Mode
User Setting Mode [3] (continued)
User Lens Mode Ratio Setting [3]
The preset and userset ratios available on the Basic Screen are used to reduce and
enlarge the original image to accommodate copy paper size.
Normally, users are allowed to change the three
Custom
s in the bottom line on the User
Lens Mode Ratio Setting Screen. The preset keys in the top and middle lines can be
programmed in 2-5 DIP SW mode for special purposes, but ordinarily, it is recommended
that they remain unchanged.
❒
Setting options: Preset ratio or Custom zoom
❒
Default setting: Custom 1: 4.000
Custom 2: 2.000
Custom 3: 0.500
User Setting Mode Menu Screen User Lens Mode Ratio Setting Screen
1 Press [ Help ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
2 Touch
[3] User setting mode
to display the User Setting Mode Menu Screen, then touch
[3] User lens mode ratio setting
to display the User Lens Mode Ratio Setting Screen.
3 Touch the
Custom
you want to change, then enter a ratio from 0.250~4.000, using the
keypad.
If a ratio under 0.250 is entered, 0.250 will be displayed.
If a ratio over 4.000 is entered, 4.000 will be displayed.
4 Touch
OK
to complete the setting and return to the User Setting Mode Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 Touch RETURN to return to the Basic Screen and perform copying operations.
DL650us131v1.fm 17 ページ ２００１年１１月１４日 水曜日 午後３時３４分