imagistics DL650, Operating Manual

Page: 76 / 344

5-6 Copier Management
Copier Management
Weekly Timer Function
When a copier is using the Weekly Timer function, the Timer indicator on the right side of
the control panel is lit.
Important: When the Timer indicator is lit, the copier will automatically be turned off. Do not
turn it off by pressing power switch.
Timer Interrupt
When the Timer indicator light is on and other indicators are off, the copier is unavailable
due to the Weekly Timer function.
However, the copier will become available if you perform the following procedure.
1 Press [ Energy Saver ].
The Basic Screen will be displayed along with the messages shown below.
Please wait
Copier is warming up
Timer interrupt mode
Enter password
NOTE: The Timer Interrupt password is not factory set and must be entered by the Key Operator (see p. 13-39
in “Section 13: Key Operator Mode”). In the event the Timer Interrupt password has not been entered by
the Key Operator, the message shown in Step 3 will display instead.
Start
Stop
Copy
Energy Saver
Interrupt
Panel Reset
Timer
Print Scan
DL650us05v1.fm 6 ページ ２００１年１１月１４日 水曜日 午後２時５６分