imagistics DL650, Operating Manual

Page: 86 / 344

How to Make a Basic Copy (continued)
6-6 Basic Operations
Basic Operations
Recalling Previous Job Settings
Follow the procedure below to copy with a previous job’s settings.
NOTES:1 Only the last-completed output job settings can be recalled as the previous job settings. Non-complete
job or reserve job settings cannot be recalled, even if the setting operations have been made last.
2 The previous job settings can be recalled, even after the machine power is turned off then on.
Job No. Selection Screen)
1 Press [
Program Memory
] on the control panel to display the Job No. Selection Screen.
2 Touch
PRE-JOB RECALL
, then touch
OK
to return to the Basic Screen.
Change the settings recalled on the screen, if desired.
3 When all settings are acceptable, position original(s) in the EDH or on the platen glass,
then press [ Start ].
DL650us061v1.fm 6 ページ ２００１年１１月１４日 水曜日 午後２時５７分