imagistics DL650, Operating Manual

Page: 84 / 344

How to Make a Basic Copy (continued)
6-4 Basic Operations
Basic Operations
Setting Job During Warm-up
While the machine is warming up after power is turned on, select copy conditions and start
scanning so that the machine can start printing as soon as the machine becomes
available.
Warm-up Screen Basic Screen (setting job available)
Basic Screen (next reserve job available) Basic Screen (next reserve setting)
1 Turn on the main power and power switches of the machine.
Seven types of Warm-up Screens display on the LCD touch panel in succession for
approx. 6.0 minutes.
2 Touch the LCD panel to change the Warm-up Screen to the Basic Screen. Check that
the message “Ready to copy reserve” is displayed on the Basic Screen.
3 Set the desired copying conditions, and enter the print quantity.
4 Position original(s) FACE UP in the EDH or FACE DOWN on the platen glass.
5 Press [
Start
]. The original for the job will be scanned.
When scanning is completed, the highlighted FREE JOB folder key will change to
RESERVE JOB , and the next FREE JOB becomes active.
6 If setting more than one reserve job, touch the next
FREE JOB
to highlight it.
Repeat step 3 to 5. Up to 5 reserve jobs can be prepared.
Copying on the reserve job will start automatically after completing the warm-up.
NOTE: To stop printing, press [Stop]. See p. 6-5 for details.
NOTE: The Job Status Screen allows you to alter the output order of the reserve jobs or to delete the reserve
job. See p. 6-30 ~ p. 6-32.
DL650us061v1.fm 4 ページ ２００１年１１月１４日 水曜日 午後２時５７分