imagistics DL650, Operating Manual

Page: 20 / 344

Features of the DL650 (continued)
1-8 Introduction
Introduction
• Output mode for Machine with 9940/9922 Finisher Installed:
Non-Sort, Sort, Staple-Sort, and Group modes using the primary (main) tray
Non-Sort Face Down exit, Non-Sort Face Up exit, Group Face Down exit, and
Group Face Up exit modes using the secondary (sub) tray
Folding, Stapling & Folding, and 3-Folding modes using the booklet tray (9922
only)
Selects an output tray and output mode on the Finisher Mode Selection Screen and on the
Control panel. For details of each output mode, see Section 7: Output Modes.
• Output for Machine with no Finisher Installed: Sort and Group modes
Use the default condition to output copies in the same order as the originals. Use the Sort
mode to alternately switch the horizontal and vertical orientation of each copied set upon
exit. Use the Group mode to output multiple copies of each original without offsetting them
upon exit.
• Output mode for 9940/9922 Finisher with 9924 Cover Inserter Installed:
Cover Sheet mode
Manual Finishing mode
For details of each output mode, see Section 7: Output Modes.
• Overlay
Imprints a scanned image onto the copy image.
• Overlay Memory
Stores the overlaying image in HDD and prints a stored image onto the copy image.
• Panel Reset
Automatically resets to auto mode defaults after a specified period of copier inactivity.
• Paper Capacity
Total 2,600 sheets, including two 500-sheet trays, a 1,500-sheet tray, and a 100-sheet
Multi Sheet Bypass tray.
Total 6,600 sheets, including 4,000-sheet optional large capacity tray.
• Platen Memory
Scans documents into memory from the platen glass and/or the EDH (document handler)
and inserts the pages into another document copied from the EDH. If an incompatible
function is selected in this mode, the latter function will not be selected, and a Caution
message will be displayed.
DL650us01v1.fm 8 ページ ２００１年１１月１４日 水曜日 午後２時５１分