imagistics DL650, Operating Manual

Page: 135 / 344

Output Modes 7-7
Output Modes
Staple-Sort Mode Using Primary (Main) Tray
Use this mode when you want to offset and staple each copied set. Stapling position and
number of staples (1 or 2) can be designated on the Output Mode Screen.
Each finished set will be offset from the next copied set.
With the Primary (main) tray initially selected on the Output Mode Screen, 9940/9922
outputs the printed sheets FACE DOWN in the proper order.
❒
Stapled paper at 1 position: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" (5.5"x8.5" is available in
crosswise orientation only.)
❒
Stapled paper at 2 positions: only 8.5"x11" paper loaded with larger vertical dimension
11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" paper loaded with larger
horizontal dimension
❒
Paper capacity for 20 lb: 1,000 sheets (Variable according to the number of pages to be stapled.
See p. 4-9 for details.)
❒
Staple capacity: 50 sheets 20 lb (5.0mm thick or less)
(Staple capacity is changeable, and may be set to 45, 40, or 35 by service.)
❒
Staple position: 1 oblique staple*; 2 parallel staples
*: Oblique staple may change to parallel staple when using some copy sizes.
❒
Incompatible Copy Conditions: Using platen glass (available when using Image Insert, Book
Copy, Platen Store Mode), Folding / Stapling & Folding / Three-Folding, Transparency Interleaving
Basic Screen
3
2
3
2
1
3
2
1
3
2
3
1
3
2
1
1 oblique staple
2 parallel staples
DL650us071v1.fm 7 ページ ２００１年１１月１４日 水曜日 午後３時１２分