imagistics DL650, Operating Manual

Page: 144 / 344

7-16 Output Modes
Output Modes
Punching Mode
The Punching mode is available only when the Punch Kit option is installed on the 9940/
9922 Finisher.
When the Punching mode is selected in combination with any of the Primary (Main) tray
output modes, each copied sheet is punched and output to the Primary tray according to
the selected output mode.
NOTE: Some staple positions previously selected may conflict with this function.
❒
Copy paper size: 11"x17", 8.5"x11" (20 lb paper recommended)
❒
Paper weight: 20 lb ~ 24 lb bond recommended
Thin paper: 16 lb ~ 19 lb
Thick paper: 25 lb ~ 45 lb
❒
Number of holes: 3 holes
❒
Hole diameter: 0.315" ± 0.020" (8 mm ± 0.5 mm)
❒
Hole pitch: 4.252" ± 0.020" (108 mm ± 0.5 mm)
❒
Incompatible Basic Copying Conditions: Using platen glass (available when using Platen store
mode), Folding, Stapling & Folding, Three-Folding, Output modes using secondary tray, Cover
Sheet mode
❒
Incompatible Special Originals: Mixed Original with APS mode and/or 8.5"x11"R, 5.5"x8.5"
mixed, Non STD Size
❒
Incompatible Applications: Sheet/Cover Insertion, Copy insertion mode in Chapter, Cover sheet
mode in Booklet, Transparency Interleave, Program Job
Output Mode Screen
Basic Screen
4.252"
(108mm)
DL650us071v1.fm 16 ページ ２００１年１１月１４日 水曜日 午後３時１２分