imagistics DL650, Operating Manual

Page: 307 / 344

Key Operator Mode 13-57
Key Operator Mode
Non-Image Area Erase Setting [20]
Select the mode of Non-Image Area Erase function to be in effect when this feature is
selected on the Application Selection Screen after power is turned on or after Auto/Reset
occurs.
Key Operator Mode Screen 2 Non-Image Area Erase Setting Screen
1 Press [
Help
] to display the Help Screen, then touch
Key Operator Mode
.
Enter the 4-digit Key Operator password, then touch
OK
to display the Key Operator
Mode Screen. (See note 1.)
To display menus [11] to [20] of the Key Operator Mode Screen, touch the
Lower
arrow key.
2 Touch
[20] Non-image area erase setting
to display the Non-Image Area Erase Setting
Screen.
3 Select the desired erase mode and original density level.
Touch
AUTO
to let the machine select the erase mode and density level automatically.
To specify the erase mode manually, touch
Oblique erase
or
Rectangle erase
, as
desired, then select the density level required. Five exposure levels are provided.
4 Touch OK to complete the setting and restore the Key Operator Mode Screen.
5 Touch
RETURN
to return to the Basic Screen and perform copying operations.
NOTE: 1. If an invalid password is entered, enter the valid 4-digit password.
2. Select AUTO mode if the specified Oblique or Rectangle Erase mode does not function properly due
to the type of set original.
DL650us133v1.fm 57 ページ ２００１年１１月１４日 水曜日 午後３時４５分