imagistics DL650, Operating Manual

Page: 236 / 344

11-8 Server Function
Server Function
Image Store & Output Mode
Use this function to store the scanned image data in HDD after copying is completed.
This storing function does not conflict with any other copying conditions.
NOTE: Installation of the optional Hard Disk Drive Kit (DL6500020) is required for this function. With the HDD
installed, the HDD STORE key will be displayed on the Output Mode Screen.
Output Mode Screen (with Finisher) Output Mode Screen (without Finisher)
Image Data Password Entry Screen Job Name Entry Screen
1 Touch OUTPUT APPLI. on the Basic Screen to display the Output Mode Screen.
2 Touch
HDD STORE.
The Image Data Password Entry Screen will be displayed.
3 Enter the desired Image data password in up to 8 characters from the touch screen
keypad.
To correct an entry, touch
1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch
OK
to display the Job Name Entry Screen.
Enter the desired job name in up to 8 characters from the touch screen keypad.
To correct an entry, touch
1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct job name.
5 If the job name is correct, touch
OK
twice to return to the Basic Screen.
6 Select the desired copying conditions, then enter the desired print quantity.
7 Position original(s) FACE UP in the EDH or FACE DOWN on the platen glass.
When using Platen store mode, see p. 6-35 to p. 6-36.
When using EDH store mode, see p. 6-37.
While using Program job, the scanned and output data can be stored in HDD. See p. 9-
22.
DL650us11v1.fm 8 ページ ２００１年１１月１４日 水曜日 午後３時２８分