imagistics DL650, Operating Manual

Page: 265 / 344

Key Operator Mode 13-15
Key Operator Mode
User Setting Mode [3]
Set two user-set density levels and three USERSETs of magnification.
User Density Level 1 Setting [1]
Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USER 1.
The programmed copy density can be recalled by selecting USER 1 on the Basic Screen.
User Setting Mode Menu Screen User Density Level 1 Setting Screen
1 Press [
Help
] to display the Help Screen, then touch
Key Operator Mode
.
Enter the 4-digit Key Operator password, then touch
OK
to display the Key Operator
Mode Screen.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
2 Touch
[3] User setting mode
to display the User Setting Mode Menu Screen, then touch
[1] User density level 1 setting to display the User Density Level 1 Setting Screen.
3 Place the original on the platen glass or in the EDH.
4 Touch
Darke
r or
Lighter
to select the density level to be programmed.
5 Touch
No.1 1~4, No.2 5~8, No.3 9~12, No.4 13~16
, or
Set density ##
, then press [
Start
].
A density level sample sheet will be output.
6 Select the desired exposure from the sample sheet(s), then enter the density level
number by using the touch screen keypad.
7 Touch
OK
to complete the setting and return to the User Setting Mode Menu Screen.
8 Touch
RETURN
to restore the Key Operator Mode Screen.
9 Touch
RETURN
to return to the Basic Screen and perform copying operations.
DL650us131v1.fm 15 ページ ２００１年１１月１４日 水曜日 午後３時３４分