imagistics DL650, Operating Manual

Page: 247 / 344

Shortcuts 12-7
Shortcuts
Reverse Image
(p. 9-25)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
Reverse Image
to switch from the black-on-white copying mode to white-on-
black copying.
3 Make additional copying selections.
4 Touch
OK
to return to the Basic screen.
5 Enter the print quantity amount.
6 Position original(s) face up on the EDH (Electronic Document Handler) tray or face
down on the platen glass.
7 Press [
Start
]. When copying is completed, press [
Panel Reset
] to reset the machine.
Repeat Image
(p. 9-26)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
Repeat
to display the Repeat mode selection screen.
3 Touch Vertical/Horizontal to select the mode, then specify the vertical and horizontal
widths of the scanning area using up/down arrow key, or touch ENTER REPEAT WIDTH
BY KEYPAD
to display a popup screen to enter a value from the touch screen keypad.
Touch
AUTO
to allow the machine to set the equal repeat area according to the size of
the original placed onto the platen glass with non-image area erase functioning.
Touch
2 Repeat
,
4 Repeat
, or
8 Repeat
to allow the max. repeats according to the size
of the original.
4 Touch OK to return to the Application selection screen.
5 Make additional copying selections.
6 Touch
OK to return to the Basic screen.
7 Enter the print quantity amount.
8 Position original(s) face down on the platen glass.
If you selected the
AUTO
or
2/4/8 Repeat
, keep the EDH (Electronic Document Handler
cover) open during copying.
9 Press [
Start
]. When copying is completed, press [
Panel Reset
] to reset the machine.
Frame/Fold Erasure
(p. 9-29)
1 Touch
APPLI.
to display the Application selection screen.
2 Touch
Frame/Fold Erasure
to display the Frame/Fold erasure selection screen.
3 Touch
Frame Erasure (All sides)
or
Frame Erasure (Each side)
, then enter a value or
use the default setting.
4 Touch Fold Erasure , then enter a value or use the default setting.
5 Touch
OK
to complete the setting and return to the Application selection screen.
6 Make additional copying selections, or touch
OK
to return to the Basic screen.
7 Select copy size and enter the print quantity amount.
8 Position original(s) face up on the EDH (Electronic Document Handler) tray or face
down on the platen glass.
9 Press [
Start
]. When copying is completed, press [
Panel Reset
] to reset the machine.
DL650us12v1.fm 7 ページ ２００１年１１月１４日 水曜日 午後３時３２分