imagistics DL650, Operating Manual

Page: 239 / 344

Server Function 11-11
Server Function
Image Recall Mode (continued)
Selecting
WAIT OUTPUT
:
(1) Touch
OK
. The Image Data Recalling Screen will be displayed to show the current
status of transmission.
When the data transmission is completed, the Basic Screen will be displayed
reflecting the settings made for that job.
(2) Enter the desired print quantity, then press [
Start
] to print.
Mode Check Screen
Selecting
PROOF OUTPUT
:
(1) Touch
OK
. The Basic Screen is
restored, and the data is transmitted.
When the data transmission is
completed, the Mode Check Screen
will be displayed after a set of sample
copy is output.
(2) Check the sample copy, then change the copy conditions if required.
Enter the desired print quantity, then press [ Start ] to print.
Recall Job Selection Screen (popup menu displayed)
Selecting AUTO OUTPUT :
(1) Touch
OK
. The popup menu to enter
the print quantity will be displayed.
(2) Enter the desired print quantity, then
touch OK .
The Image Data Recalling Screen will
be displayed to show the current
status of transmission.
When the data transmission is completed, the machine automatically starts to print.
NOTE: To suspend recall while the Image Data Recalling Screen is displayed, touch CANCEL . If the popup
menu shown below is displayed, touch YES to delete the data recalled to DIMM, or touch NO to continue.
The data stored in HDD will not be erased by this operation.
The popup menu displays when the Memory Switch No. 43 is turned on in the Key Operator Mode. See
p. 13-43 to p. 13-49.
Image Data Recalling Screen (popup menu displayed) Image Data Recalling Screen (popup menu displayed)
DL650us11v1.fm 11 ページ ２００１年１１月１４日 水曜日 午後３時２８分