imagistics DL650, Operating Manual

Page: 193 / 344

Applications 9-23
Applications
Non-Image Area Erase
The Non-image area erase mode is used to copy non-standard or special originals, such
as books, magazines, paste-ups, graphs, thin or thick materials, etc. from the platen glass.
The exposed glass area outside the borders of the original will not be copied.
This mode helps to preserve the condition of originals, improves copy quality, and
eliminates unnecessary toner consumption. Keep the EDH open throughout the
procedure.
Non-image area erase has two modes; Rectangular erase mode and Oblique erase mode.
The copier is initially set to select either mode appropriate for the original placed on the
platen glass (AUTO mode). Key Operator can specify either mode and the original density
level manually so that the Non-Image Area Erase functions without fail.
❒
Copy mode: 1-1 mode only (when using Store mode, 1-2 mode can be selected.)
❒
Use the platen glass only. Keep the EDH open throughout the scanning procedure.
❒
Original size: 11"x17" ~ 10mm x 10mm
❒
Image cutoff width: leading end 5mm, trailing end 4mm, top and bottom 2mm.
❒
Incompatible Basic Copying Conditions: Using EDH, APS, AMS, Rotation, 2-2, 2-1, Rotation
Sort, Rotation Group
❒
Incompatible Special Originals: Mixed Original, Z-Folded Original
❒
Incompatible Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, Image Insert,
Book Copy in EDH Store mode, Reverse Image, All-Image Area, Reduce & Shift in Image Shift,
Storing image in Overlay Memory
Oblique erase mode Rectangular erase mode
NOTE: The Non-image area erase function may not operate properly if the lighting in the work place is directly
over the platen glass. In this case, consult your service representative about an appropriate place for
installation.
DL650us092v1.fm 23 ページ ２００１年１１月１４日 水曜日 午後３時２１分