imagistics DL650, Operating Manual

Page: 198 / 344

Repeat Image (continued)
9-28 Applications
Applications
3 To select the Vertical/Horizontal width setting mode:
(1) Touch
Vertical/Horizontal
.
(2) Specify the vertical and horizontal widths of the scanning area using up/down arrow
key, from 10~150 mm in 1 mm increments. Keep touching the key to increase/
decrease the value continuously.
Or, touch
ENTER REPEAT WIDTH BY KEYPAD
to display the popup screen to enter
the value from the touch screen keypad. Touch
Verti./Horiz
key on the popup screen
each time to shift it from one to another. Touch
OK
to restore the Repeat Mode
Selection Screen
Repeat Mode Selection Screen (with popup screen displayed)
To select the Auto detection mode, touch
AUTO
. Non-image area erase will function
automatically.
To select the Repeat mode, touch
2 Repeat , 4 Repeat , or 8 Repeat , as desired.
4 Touch
OK
to return to the Application Selection Screen.
5 Select additional copying features, as desired.
When 2 Repeat mode is selected, Page space function of Image shift can be used to
make the desired amount of blank space between the two images on a page. See p. 9-
34 to p. 9-37.
6 Touch
OK
to complete the setting and return to the Basic Screen.
7 Enter the desired print quantity.
8 Position original(s) FACE DOWN on the platen glass.
IMPORTANT: DO NOT CLOSE THE EDH WHEN AUTO, 2 REPEAT, 4 REPEAT, OR 8
REPEAT IS SELECTED IN STEP 3.
When using Platen store mode, 1-2 mode can be selected. See p. 6-35 to p. 6-36.
Option: Press [Mode Check] to view the selection, and make a Proof copy if desired. Touch EXIT to return to
the Basic Screen. See p. 6-43 to p. 6-45.
9 Press [
Start
].
After copying is completed, touch
Repeat
on the Application Selection Screen or press
[ Panel Reset ] to release the mode and reset the machine.
DL650us092v1.fm 28 ページ ２００１年１１月１４日 水曜日 午後３時２１分