imagistics DL650, Operating Manual

Page: 219 / 344

Applications 9-49
Applications
Overlay Memory (continued)
To Overlay Image Stored in HDD
The following procedure describes how to overlay the image stored in HDD onto each
page copied in the job.
❒
APS and AMS are automatically released.
❒
Magnification is initially set to 1:1. This setting is changeable.
❒
Original/Copy size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
❒
Incompatible Basic Copying Conditions: None
❒
Incompatible Special Originals: None
❒
Incompatible Applications: Reverse Image, STAMP, SET NUMBERING, WATERMARK,
WATERMARK NUMBERING in Stamp
Application Selection Screen Stamp/Overlay Selection Screen
1 Touch
APPLI.
on the Basic Screen to display the Application Selection Screen.
2 Touch Stamp/Overlay . The Stamp/Overlay Selection Screen will be displayed.
3 Touch OVERLAY MEMORY to display the Overlaying Image Selection Screen.
NOTE: Without HDD, the OVERLAY MEMORY key will be dimmed on the Stamp/Overlay Selection Screen to
show inactivity.
Overlaying Image Selection Screen
4 Select the desired overlaying image data to highlight it. Use up/down arrow key to scroll,
if needed.
5 Touch
OK
to return to the Stamp/Overlay Selection Screen.
6 Touch
OK
to return to the Application Selection Screen.
DL650us092v1.fm 49 ページ ２００１年１１月１４日 水曜日 午後３時２１分