imagistics DL650, Operating Manual

Page: 330 / 344

Copying Hints (continued)
15-10 Troubleshooting
Troubleshooting
CALL FOR PM IS DISPLAYED IN MESSAGE AREA
Contact your service representative for Preventive Maintenance.
APS SELECTS THE WRONG PAPER SIZE
Paper guides must be adjusted exactly to the size of originals.
IN MIXED ORIGINAL MODE, A MESSAGE TO LOAD A REQUIRED PAPER SIZE DISPLAYS,
EVEN THOUGH THAT SIZE IS LOADED IN ONE OF THE TRAYS
Paper sizes loaded in the trays must be consistent with the tray position size; otherwise,
the tray key on the Basic Screen will blink.
THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN OPERATING
MANUAL
Check with the Key Operator, as Initial Settings may have been changed.
“PLEASE CHECK ORIGINAL”
This message displays when the copier detects a non-standard paper size on the platen
glass.
Select copy size and press [
Start
]. 1.000 magnification will be selected automatically.
If this message continues to display after selecting copy size, select 1.000 magnification,
even if it is already indicated, then press [
Start ]. If desired, ask your service representative
to enable the machine to default to 1.000 magnification in this situation.
SHEET INSERTION RESULT IS NOT AS EXPECTED
Blank insertion: Be sure manuscript originals do not already include blank sheets in the
locations designated for sheet insertion.
Copy insertion: To ensure that chapter sheets in 1-2 mode always appear on the right hand
side in the finished set, insertion sheets must be designated on the page setting screen
with odd numbers, not even. If required, make an even numbered original page odd by
inserting a blank sheet in front of that page, so that the blank sheet is even and the
insertion sheet is odd.
FINISHER STAPLE RESULT IS NOT AS EXPECTED
The 2 staple position functions only on copy paper that is loaded vertically (crosswise
style).
DL650us15v1.fm 10 ページ ２００１年１１月１４日 水曜日 午後４時５分