imagistics DL650, Operating Manual

Page: 264 / 344

Copier Initial Setting [2] (continued)
13-14 Key Operator Mode
Key Operator Mode
Key Operator Mode Screen Copier Initial Setting Screen
1 Press [
Help
] to display the Help Screen, then touch
Key Operator Mode
.
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
2 Touch [2] Copier initial setting to display the Copier Initial Setting Screen.
3 Make a selection for each mode as initial settings.
Touch
EDH
to select or deselect it.
NOTE: The machine will restore the initial settings specified as above unless the Memory switch No. 4 “ Program
memory (30) auto recall” is turned ON with the Job memory No. 30 registered.
4 Touch OK to complete the setting and return to the Key Operator Mode Screen.
5 Touch
RETURN
to return to the Basic Screen and perform copying operations.
DL650us131v1.fm 14 ページ ２００１年１１月１４日 水曜日 午後３時３４分