imagistics DL650, Operating Manual

Page: 192 / 344

Program Job (continued)
9-22 Applications
Applications
Application Selection Screen Basic Screen with popup menu displayed
1 Touch APPLI. on the Basic Screen to display the Application Selection Screen.
2 Touch
Program Job.
The incompatible function keys will be dimmed to show inactivity.
3 Select additional copying features, as desired.
4 Touch
OK
to complete the setting and return to the Basic Screen.
5 Store mode is selected automatically. Select basic copying and special original features
on the Basic Screen and Special Original Screen, as desired.
6 Position original(s) FACE UP in the EDH or FACE DOWN on the platen glass, select the
tray you want to use, then press [
Start
] to scan.
7 When scanning for the current JOB is completed, the popup menu will be displayed in
the Basic Screen.
To store the current JOB images, touch
DECISION
.
To delete the images, touch
CANCEL
.
8 Repeat steps 3 to 7 until all JOB originals are scanned.
IMPORTANT: PLACE AND SCAN EACH ORIGINAL SET IN THE CORRECT ORDER OF
PAGINATION.
9 Select the desired output mode.
10 Enter the desired print quantity.
11 Touch STORE on the Basic Screen to exit the Store mode.
To delete the scanned data without printing, press [ Stop ], then touch CANCEL on the
popup menu to ensure that you delete the data.
12 Press [
Start
]. The copier starts the printing job.
After copying is completed, press [
Panel Reset
] to release the mode and reset the
machine.
DL650us091v1.fm 22 ページ ２００１年１１月１４日 水曜日 午後３時１９分