imagistics DL650, Operating Manual

Page: 149 / 344

Output Modes 7-21
Output Modes
9924 Cover Inserter (continued)
Basic Screen Output Mode Screen
Cover Sheet Insert Selection Screen
1 Close the EDH securely, then press [ Panel Reset ].
2 Touch
OUTPUT APPLI.
on the Basic Screen to display the Output Mode Screen.
3 Touch
COVER SHEET
to display the Cover Sheet Insert Selection Screen.
4 Touch
FRONT
,
FRONT+BACK
, or
BACK
to highlight it, then select the covers tray.
When selecting FRONT+BACK mode, different tray source can be specified for each.
NOTE: Copy paper sizes available to be loaded are different in each tray. See the specification on p. 7-20.
Touch
OK
to restore the Output Mode Screen.
5 Touch
OK
on the Output Mode Screen. The Basic Screen will be restored.
6 Select additional copying features, as required.
7 Load the cover sheet paper into the optional 9924
Cover Inserter of the 9940/9922 Finisher.
If the paper size loaded in the 9924 Cover Inserter
is not suitable, the following messages will be
displayed and copying will be unavailable.
Please load cover sheet in
cover inserter
Adapt paper size between
cover sheet and selected paper
Upper tray
Lower
tray
DL650us071v1.fm 21 ページ ２００１年１１月１４日 水曜日 午後３時１２分