imagistics DL650, Operating Manual

Page: 274 / 344

ECM (Electronic Copy Monitor) Function Setting [4] (continued)
13-24 Key Operator Mode
Key Operator Mode
E.C.M. All Count Reset [2]
Reset the count for all ECM accounts.
ECM Setting Menu Screen ECM All Count Reset Screen
1 Press [
Help
] to display the Help Screen, then touch
Key Operator Mode
.
Enter the 4-digit Key Operator password, then touch
OK
to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [4] E.C.M. function setting . The ECM Master Key Code Screen displays, if a code
is required.
3 Enter your 8-digit ECM master key code, then touch
OK
to display the ECM Setting
Menu Screen. (See note 2.)
4 Touch [2] E.C.M. all count reset . The ECM All Count Reset Screen will be displayed.
5 Touch YES to reset all counters to zero and to return to the ECM Setting Menu Screen or
touch
NO
to cancel.
Touching
RETURN
will also cancel this function and return to the ECM Setting Menu
Screen.
6 If other ECM setting changes are required, touch the desired key, from [1]~[3].
7 Touch
RETURN
to restore the Key Operator Mode Screen.
8 Touch
RETURN
to return to the Basic Screen and perform copying operations.
NOTES: 1 If an invalid password is entered, enter the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.
DL650us132v1.fm 24 ページ ２００１年１１月１４日 水曜日 午後３時３６分