imagistics DL650, Operating Manual

Page: 123 / 344

Basic Operations 6-43
Basic Operations
Check Mode and Proof Copy
Use the Check mode to confirm copying selections before pressing the [
Start
] key. The
Mode Check Screen allows you not only to view the current settings but to change or
release them directly from the Check mode.
In this mode, use Proof copy to produce a sample of the copied set before copying multiple
copies. This is a convenient and cost effective way of viewing the results of the following
copying selections.
• Copying conditions using Store mode • Booklet
• Sheet/Cover Insertion • Image Insert
• Chapter • Book Copy
• Combination • Program Job
With Proof copy, all originals are scanned into memory, and only one set is output after you
press the [
Proof Copy ] key on the control panel or touch PROOF COPY key on the Mode
Check Screen. After Proof copy, some copying condition keys may appear dimmed in the
Mode Check Screen. You cannot change or release the copying conditions indicated on
these grayed out lights.
When [
Start
] key is pressed, the job resumes copying until the job is completed.
❒
All settings made can be viewed in the Mode Check Screen.
❒
Incompatible Copying Conditions with Proof Copy: Group
Control Panel Mode Check Screen
1 Press [
Mode Check
] on the control panel to display the Mode Check Screen.
2 Verify the settings made for the current job.
3 If necessary, press [
Proof Copy ] on the control panel or touch PROOF COPY on the
Mode Check Screen to output a set of sample copy.
4 Touch
EXIT
(or press [
Mode Check
]) to exit from the Mode Check mode and return to the
Basic Screen.
5 Press [
Start
] when the Basic Screen is displayed.
Help
Program Memory
Mode Check
Utility
Proof Copy
DL650us063v1.fm 43 ページ ２００１年１１月１４日 水曜日 午後３時１０分