imagistics DL650, Operating Manual

Page: 88 / 344

Copy Mode (continued)
6-8 Basic Operations
Basic Operations
Copy Mode Using EDH
Before selecting the Copy Mode shown on the screen below, read specifications on the
previous page and see Section 4 for information on positioning originals.
Basic Screen (with 1
s
2 mode selected)
1 Touch the desired mode key on the Basic Screen:
1
s s
s s
1
,
1
s s
s s
2
,
2
s s
s s
1
, or
2
s s
s s
2
.
A copy mode key will appear dimmed if it is incompatible with other selections made.
NOTE: When selecting 1
s s s s
2 or 2
s s s s
2 , specify the original direction and the binding mode on the Special
Original Screen and the Output Mode Screen, respectively. See step 1 to 2 on the next page for
details.
2 Position originals FACE UP in the EDH, as required.
3 When all settings are acceptable, press [
Start
].
To cancel the mode, touch the desired Copy Mode key on the Basic Screen.
NOTE: When the selected print quantity exceeds the Finisher’s maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
DL650us061v1.fm 8 ページ ２００１年１１月１４日 水曜日 午後２時５７分