imagistics DL650, Operating Manual

Page: 57 / 344

Basic Operations 3-15
Machine Information
Lead Edge Delete
When using the EDH, image deletion of a few millimeters will occur on the lead edge for
the purpose of controlling copy quality and copy reliability, unless deactivated by the Key
Operator. See p. 13-43 to p. 13-49.
Service Settings
The following functions can be provided by your service representative, who is authorized
to change DIP switch settings. Contact your service representative if setting change is
required.
Finisher-Paper Capacity
In the default condition, the DL650 will produce unlimited sets. If required, your service
representative can set the copier to stop copying when the number of copies exceeds
specified capacity.
Key Operator Password
Your service representative can set a 4-digit Key Operator password to access the Key
Operator Mode Screen. After this setting, a Password Entry Screen will display and require
entry of the Key Operator password to access the Key Operator Mode Screen.
ECM Master Key Code
Your service representative can set an 8-digit ECM master key code to access the ECM
Setting Menu Screen. After this setting, the ECM Master Key Code Screen will be
displayed and will always require entry of the set ECM master key code to access the ECM
Setting Menu Screen.
Weekly Timer Master Key Code
Your service representative can set a 4-digit Weekly Timer master key code to access the
Weekly Timer Setting Menu Screen. After this setting, the Weekly Timer Master Key Code
Screen will be displayed and will always require entry of the set Weekly Timer master key
code to access the Weekly Timer Setting Menu Screen.
DL650us03v1.fm 15 ページ ２００１年１１月１４日 水曜日 午後２時５３分