imagistics DL650, Operating Manual

Page: 291 / 344

Key Operator Mode 13-41
Key Operator Mode
Tray Auto Select Setting [11]
Select whether the tray size setting will be detected or not detected when ATS/APS
functions. If you select it to be detected, you may also select the priority of the detection for
each tray.
Key Operator Mode Screen 1 Key Operator Mode Screen 2
Tray Auto Select Setting Screen
1 Press [ Help ] to display the Help Screen, then touch Key Operator Mode .
Enter the 4-digit Key Operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
To display menus [11] to [20] of the Key Operator Mode Screen, touch the
Lower
arrow key.
2 Touch [11] Tray auto select setting to display the Tray Auto Select Setting Screen.
3 On the left half of the screen, touch to highlight each tray key, then select
OFF
or
ON
to
specify whether the selected tray is to be automatically detected or not when ATS/APS
functions.
4 Tray keys specified as ATS/APS ON will appear on the right half of the screen.
Touch to highlight the desired tray key, then change its priority by using Up
▲
and Down
▼
arrow keys.
5 Touch
OK
to complete the setting and restore the Key Operator Mode Screen.
6 Touch
RETURN
to return to the Basic Screen and perform copying operations.
NOTE: If an invalid password is entered, enter the valid 4-digit password.
DL650us133v1.fm 41 ページ ２００１年１１月１４日 水曜日 午後３時４５分