imagistics DL650, Operating Manual

Page: 263 / 344

Key Operator Mode 13-13
Key Operator Mode
Copier Initial Setting [2]
Initial settings are the settings that display automatically when the copier is powered on,
when Panel Reset timer is operated, or when [Panel Reset] key is pressed. These settings
can be changed by the Key Operator, as shown in this section.
Initially, i.e., at installation, the Basic Screen displays the following condition to meet
Energy Star requirements:
Initial Setting
Copy Mode: 1-1
Copy Density: AES
Lens Mode:
1:1
Copy Size: APS
Output Mode: offset sort
When Initial settings are changed by the Key Operator, the new initial settings display
when the copier is powered on, when Panel Reset timer is reached, or when [Panel Reset]
key is pressed.
The following initial settings can be changed by the Key Operator:
Copy Mode: [EDH; 1-1; 1-2; 2-2; 2-1]
Copy Density: [AES; manual]
Lens Mode:
[AMS; ratio 0.250~4.000]
Copy Size: [APS; trays 1, 2, 3, or LCC]
Output Mode: [Non-sort; Sort; Group; Staple-sort; Stapling & Folding; Folding;
Punch; Three-folding; cover sheet]
Special Original: [Original Direction; Text/Photo Enhance; Special Original; Original
Form]
Rotation: OFF
Setting procedures are described on the following pages.
NOTE: The most commonly-used settings are established at installation. Before changing any of the copier
settings, be sure that you understand the overall and long-range effect of the change.
DL650us131v1.fm 13 ページ ２００１年１１月１４日 水曜日 午後３時３４分