imagistics DL650, Operating Manual

Page: 103 / 344

Basic Operations 6-23
Basic Operations
Copy Size
The tray selection keys below COPY SIZE are used to select a specific paper tray. When a
specific tray is selected, the APS key will fade and the AMS key will be highlighted. The
copy size may require a ratio adjustment. When using the EDH with Initial settings, a ratio
will be selected automatically.
Tray locations correspond to main body (tray 1, 2, 3), LCC (tray 4), and Multi-sheet bypass
tray. Paper types, such as
Thick, Thin, User, Tab paper, Normal, Recycle, Color, Special,
Fine, Seal may be specified on the trays by the Key Operator for information only, but
paper types cannot be detected by the machine.
NOTE: Do not load paper type other than that specified, otherwise machine trouble may be caused.
❒
When a selected tray is empty, an out-of paper icon will flash on the tray key, along with a
message to load paper in the empty tray.
❒
When the Bypass key is touched and highlighted, the PAPER TYPE/SIZE key appears above the
Bypass key. Touch the key to display the Paper Type/Size Setting Screen, then specify the type
and size of the special paper to be loaded on the Multi-sheet bypass tray. See the next page.
❒
Incompatible Basic Copying Conditions with AMS: APS, Change magnification
❒
Incompatible Special Original with AMS: None
❒
Incompatible Applications with AMS: Book Copy, Non-Image Area Erase, Repeat, AUTO Layout,
Overlay, Overlay Memory
Basic Screen Basic Screen
1 Touch the desired tray key.
APS
will fade, and
AMS
will be highlighted.
When selecting the Bypass key, see p. 6-24 ~ p. 6-26.
To restore the
APS
mode, touch
APS
.
AMS
will fade, and
APS
will be highlighted.
2 Position original(s) FACE DOWN on the platen glass or FACE UP in the EDH, as
required.
3 When all settings are acceptable, press [ Start ] from the Basic Screen.
DL650us062v1.fm 23 ページ ２００１年１１月１４日 水曜日 午後３時０分