imagistics DL650, Operating Manual

Page: 145 / 344

Output Modes 7-17
Output Modes
Punching Mode (continued)
Punch Position Selection Screen
1 Touch
OUTPUT APPLI.
on the Basic Screen to display the Output Mode Screen.
2 Touch
PUNCH
to display the Punch Position Selection Screen.
3 Touch the desired punch position key on the screen to highlight it.
4 Touch
OK on the Punch Position Selection Screen to restore the Output Mode Screen.
5 Touch
OK
on the Output Mode Screen to complete the setting and return to the Basic
Screen.
The selection made in punching position will be displayed in the OUTPUT icon area.
6 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen.
7 Touch to select the desired original set direction, then touch
OK
to return to the Basic
Screen.
8 Select additional copying features, as required.
9 Enter the desired print quantity.
10 Position originals in the EDH. When using Store mode, see p. 6-35 to p. 6-37.
11 Press [
Start
].
CAUTION:
When the selected print quantity exceeds the Finisher’s maximum capacity, remove the printed sheets
while paper is exiting to avoid paper mishandling.
DL650us071v1.fm 17 ページ ２００１年１１月１４日 水曜日 午後３時１２分