imagistics DL650, Operating Manual

Page: 242 / 344

12-2 Shortcuts
Shortcuts
Set Reserve Job
(p. 6-28)
1 Touch
FREE JOB
to display the Reserve job setting screen while a current job is in
progress.
2 Select copying conditions for the reserve job. Wait for the current job to complete its
scanning operation, if necessary.
3 Position the Reserve job original(s) face up on the EDH (Electronic Document
Handler) tray or face down on the platen glass.
4 Press [
Start
] to scan the Reserve job original(s).
When scanning for the Reserve job is completed, the Basic screen for the current
printing job will be restored.
Copying for the reserve job will start when the current job is completed.
Store Originals Scanned from Platen
(p. 6-35)
1 Position the original on the platen glass.
2 Make desired copying selections, and select the 1-1 or 1-2 copy mode.
3 Touch
STORE
on the Basic screen to highlight the Store mode.
4 Press [
Start
] to scan and store the original image into memory.
Repeat Steps 1 and 4 until all originals are scanned.
5 Touch STORE to exit the Store mode.
6 Enter the print quantity amount.
7 Press [
Start
] to begin copying.
Store Originals Scanned from EDH
(
P
. 6-37)
1 Touch STORE on the Basic screen to highlight the Store mode.
2 Make desired copying selections.
3 Position no more than 100 originals at a time on the EDH (Electronic Document
Handler) tray.
4 Enter the print quantity amount.
5 Press [
Start
] to scan the originals.
Repeat Steps 3 and 5 until all originals are scanned.
6 Touch
STORE
to exit the Store mode.
7 Press [ Start ] to begin copying.
NOTES:
1. Page numbers indicated next to each Shortcut refer to the pages of the Operating Manual where more detailed
information can be found.
2. When using Platen Store mode or EDH Store mode in conjunction with other functions, check details on p. 6-
35 and p. 6-37, respectively.
DL650us12v1.fm 2 ページ ２００１年１１月１４日 水曜日 午後３時３２分