IBM X3850 X6, Installation And Service Manual

Page: 232 / 1730

Consumable parts
This topic provides a list of server consumable parts.
Consumable parts are not covered by the IBM Statement of Limited Warranty. The
following consumable parts are available for purchase from the retail store.
Table 57. Consumable parts, Type 3837 and 3839
Index Description Part number
ServeRAID M5200 Series Flash Power Module Kit 47C8696
ServeRAID M5100 Series Flash Power Module Kit 81Y4579
To order a consumable part, complete the following steps:
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
1. Go to http://www.ibm.com.
2.
From the
Products
menu, select
Upgrades, accessories & parts
.
3. Click Obtain maintenance parts ; then, follow the instructions to order the part
from the retail store.
If you need help with your order, call the toll-free number that is listed on the
retail parts page, or contact your local IBM representative for assistance.
Power cords
This topic provides a list of power cords for use in each country or region.
For your safety, a power cord with a grounded attachment plug is provided to use
with this product. To avoid electrical shock, always use the power cord and plug
with a properly grounded outlet.
Power cords for this product that are used in the United States and Canada are
listed by Underwriter's Laboratories (UL) and certified by the Canadian Standards
Association (CSA).
For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified
cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor cord,
a maximum of 15 feet in length and a parallel blade, grounding-type attachment
plug rated 15 amperes, 125 volts.
For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and
CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT,
three-conductor cord, a maximum of 15 feet in length and a tandem blade,
grounding-type attachment plug rated 15 amperes, 250 volts.
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set
with a grounding-type attachment plug. The cord set should have the appropriate
safety approvals for the country in which the equipment will be installed.
Power cords for a specific country or region are usually available only in that
country or region.
214
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide