IBM X3850 X6, Installation And Service Manual

Page: 148 / 1730

Select this choice to enable or disable restarting the server whenever a
nonmaskable interrupt (NMI) occurs. The default is
Enabled .
v
Halt On Server Error
Select this choice to prevent the server from booting the operating
system and displaying the POST event viewer when a severe error is
detected during POST.
– Security
Select this option to view or configure the Secure Boot feature and Trusted
Platform Module (TPM 1.2).
-
Secure Boot Configuration
Select this choice to enable and disable the Secure Boot feature or set the
Secure Boot mode.
- Trusted Platform Module (TPM 1.2)
Select this choice to view or configure the TPM setup options.
– Storage
Select this choice to view and manage RAID controller configurations.
v
Date and Time
Select this choice to set the date and time in the server, in 24-hour format
(
hour : minute : second ).
This choice is on the full Setup utility menu only.
v
Start Options
Select this choice to view the startup sequence or select an option to try and
boot from immediately. Changes in the startup options take effect when you
start the server.
v
Boot Manager
Select this choice to view, add, delete, or change the device boot order, boot from
a file, boot from a device, or boot the UEFI shell. This choice is on the full Setup
utility menu only.
v System Event Logs
Select this choice to enter the System Event Manager, where you can view the
UEFI/POST event log and the system-event log. You can use the arrow keys to
move between pages in the error log. This choice is on the full Setup utility
menu only.
The POST event log contains the most recent error codes and messages that
were generated during POST.
The system-event log contains POST and system management interrupt (SMI)
events and all events that are generated by the baseboard management
controller that is embedded in the integrated management module (IMM).
Important: If the system-error LED on the front of the server is lit but there are
no other error indications, clear the system-event log. Also, after you complete a
repair or correct an error, clear the system-event log to turn off the system-error
LED on the front of the server.
–
POST Event Viewer
Select this choice to enter the POST event viewer to view the error messages
in the POST event log.
– System Event Log
Select this choice to view the system-event log.
– Clear System Event Log
Select this choice to clear the system-event log.
130
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide