IBM X3850 X6, Installation And Service Manual, Page: 647 / 1730

806f000f-22010aff The System [ComputerSystemElementName] encountered firmware error - no video device
detected.
Explanation: IMM has reported that System Firmware Error No video device detected (ABR Status, Firmware Error,
Sys Boot Status) has occurred.
May also be shown as 806f000f22010aff or 0x806f000f22010aff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0766
SNMP Trap ID:
50
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
v “Finding the UEFI (POST) error code” on page 1666
806f000f-22010bff Firmware BIOS (ROM) corruption was detected on system [ComputerSystemElementName]
during POST.
Explanation:
Firmware BIOS (ROM) corruption was detected (ABR Status, Firmware Error, Sys Boot Status) on the
system during POST.
May also be shown as 806f000f22010bff or 0x806f000f22010bff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0850
SNMP Trap ID: 50
Automatically notify Support: No
User response:
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
v
“Finding the UEFI (POST) error code” on page 1666
806f000f-22010aff • 806f000f-22010bff
Appendix B. Integrated management module II (IMM2) error messages
629