S.2011001
[S.2011001]
Explanation:
An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device
is % and the Device ID is %. PCI SERR Detected
Severity:
Error
User response:
Complete the following steps:
1.
Check IBM support site for an applicable device driver, firmware update, version of service information for this
product or other information that applies to this error. Load new device driver and any required firmware
updates.
2.
If this node and/or any attached cables were recently installed, moved, serviced or upgraded, a. Reseat Adapter
and any attached cables. b. Reload Device Driver c. If device is not recognized, reconfiguring slot to Gen1 or
Gen2 may be required. Gen1/Gen2 settings can be configured via F1 Setup -> System Settings -> Devices and I/O
Ports -> PCIe Gen1/Gen2/Gen3 Speed Selection, or the ASU Utility.
3.
If problem persists, then remove Adapter Card. If system reboots successfully without the adapter, replace that
card.
4.
If problem persists, then replace the I/O book with the PCIe slot in question.
5.
If problem persists, then replace the compute book associated with the PCIe slot.
6.
(Trained Service technician only) Replace the processor.
S.2018001
[S.2018001]
Explanation:
An Uncorrected PCIe Error has Occurred at Bus % Device % Function %. The Vendor ID for the device
is % and the Device ID is %. PCIe Uncorrected Error Detected
Severity:
Error
User response:
Complete the following steps:
1.
Check IBM support site for an applicable device driver, firmware update, version of service information for this
product or other information that applies to this error. Load new device driver and any required firmware
updates.
2.
If this node and/or any attached cables were recently installed, moved, serviced or upgraded, a. Reseat Adapter
and any attached cables. b. Reload Device Driver c. If device is not recognized, reconfiguring slot to Gen1 or
Gen2 may be required. Gen1/Gen2 settings can be configured via F1 Setup -> System Settings -> Devices and I/O
Ports -> PCIe Gen1/Gen2/Gen3 Speed Selection, or the ASU Utility.
3.
If problem persists, then remove Adapter Card. If system reboots successfully without the adapter, replace that
card.
4.
If problem persists, then replace the I/O book with the PCIe slot in question.
5.
If problem persists, then replace the compute book associated with the PCIe slot.
6.
(Trained Service technician only) Replace the processor.
S.2011001 • S.2018001
1674
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide
Summary of Contents for X3850 X6
