IBM X3850 X6, Installation And Service Manual, Page: 645 / 1730

806f000f-220101ff The System [ComputerSystemElementName] has detected no memory in the system.
Explanation: IMM has reported that there is no memory (ABR Status, Firmware Error, Sys Boot Status) in the
system.
May also be shown as 806f000f220101ff or 0x806f000f220101ff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix:
PLAT and
ID:
0794
SNMP Trap ID: 41
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
v
“Finding the UEFI (POST) error code” on page 1666
806f000f-220102ff Subsystem [MemoryElementName] has insufficient memory for operation.
Explanation: IMM has reported that the usable Memory is insufficient for operation. (ABR Status, Firmware Error,
Sys Boot Status)
May also be shown as 806f000f220102ff or 0x806f000f220102ff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0132
SNMP Trap ID: 41
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
806f000f-220103ff The System [ComputerSystemElementName] encountered firmware error - unrecoverable boot
device failure.
Explanation: IMM has reported that System Firmware Error Unrecoverable boot device failure has occurred. (ABR
Status, Firmware Error, Sys Boot Status)
May also be shown as 806f000f220103ff or 0x806f000f220103ff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0770
SNMP Trap ID: 5
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
806f000f-220101ff • 806f000f-220103ff
Appendix B. Integrated management module II (IMM2) error messages
627