Hioki IM7580, Instruction Manual

Page: 37 / 340

29
LCR Function
Advanced
settings
screen
(p. 37)
[FREQ] Measurement frequency p. 37
[LEVEL] Measurement signal level p. 38
[SPEED] Measurement speed p. 40
[AVG] Average p. 41
[DELAY] Trigger delay p. 34
[SYNC] Trigger synchronous output p. 35
[TRIG] Trigger p. 33
[TIMING] Contact check timing p. 169
[AC OUT] AC signal superimposition p. 171
[DC WAIT] Wait time prior to DC measurement p. 170
[WAVE] Number of DC samples p. 171
[AC WAIT] Wait time prior to AC measurement p. 170
[LIMIT] Judgment of DC measured value p. 172
[ERR ABORT] Quit function in case of judgment error p. 172
[JDG EXEC] Judgment for reference values p. 172
[Hi Z] Hi Z reject function p. 174
[LEV CHECK] Monitoring function for detection level p. 175
[IO JUDGE]
I/O output of judgment results p. 217
[IO TRIG] IO trigger p. 215
[IO EOM] EOM output method p. 218
[MEMORY] Saving measurement results p. 258
[DISP]
LCD display p. 168
[BEEP KEY] Beep sound p. 185
[COM FORM] Communication measurement data type p. 191
[KEYLOCK] Key-lock function p. 187
[WARM UP]
Warm-up notification function p. 186
[PANEL]
Panel loading and saving
p. 223
[RESET] Initializing
[JUDGE] Judgment p. 44
[DIGIT]
Number of display digits for each
parameter
p. 177
[PARA ABS] Display of absolute value p. 178
[COM MEAS]
Setting for communication command
“
:MEASURE?
”
p. 179
3
LCR Function