Hioki IM7580, Instruction Manual

Page: 133 / 340

125
Equivalent Circuit Analysis Function
4.9.2 Configuring Basic Settings for Analysis
(1) Setting the equivalent circuit model
Select the equivalent circuit model you wish to use for equivalent circuit analysis.
You will be able to estimate constants more accurately by selecting the appropriate equivalent
circuit model.
1
3
2
1
Press [SETUP] .
2
Press [CIRCUIT] tab.
3
Press [MODEL] .
4
5
6
4
Select the model to be used in equivalent circuit
analysis.
[OFF] Turns off the equivalent circuit function.
[HOLD] Selects the equivalent circuit model manually.
[AUTO]
Selects the most suitable equivalent circuit
model automatically.
5
(If [HOLD] is selected in step 4 )
Select an equivalent circuit model to be used.
6
Press [EXIT] to close the setting screen.
• When the equivalent circuit model A to E is selected, HOLD is automatically set.
• For more information on how to select the equivalent circuit model, refer Refer to “Appx. 4 Selecting the
Equivalent Circuit Model” (p. A5).
4
Analyzer Function